Touch Bar PHT55 Three Point Panic Bolt

Three point touch bar bolt for use on a single door (timber, metal or PVCu), the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged doors.

The centre mechanism can be blanked off with plate supplied to convert it into a two point device when using it on double doors.

Comprises a touch bar, modular mechanism and covered connecting rods and vertical latching pullman latches at the top and bottom. Comes complete with dogging as standard (can be supplied without if required). The dogging (hold-back) facility should not be used on fire/smoke door assemblies but is suitable for escape doors.

Standard size – 840mm suitable for doors up to 860mm wide. Longer versions – 1170mm and 1300mm for wider doors are available. Suits doors up to 2585mm high as standard; longer rods are available to suit doors up to 3150mm high.

Supplied with strikers for timber or metal doors as standard – strikers for PVCu available separately.

Micro-switch can be fitted in the mechanism or the touch bar. This allows the door to be fitted to equipment that monitors the door status. If required, state preferred fitting location when ordering.

Optional outside access devices are available to provide entry from outside.